On your device, select the EduRoam from the list of available Wi-Fi networks.
You will be prompted to sign onto the network. Enter the following for credentials:
Username: StarID@go.minnstate.edu (students) or StarID@minnstate.edu (employees) For example: firstname.lastname@example.org
Password: your StarID password.
You may be prompted to accept a security certificate. If this happens, verify that the certificate is from radius.mnstate.us. If so, click OK to accept.
Note: Linux devices may not prompt for credentials when you first join eduroam. If that's the case, set up a "hidden" network with the settings below.
If your device asks for more information, use the following settings:
Security: 802.1x EAP / WPA2 Enterprise
EAP Method: TTLS (Tunneled TLS)
Phase-2 (Inner) Authentication: PAP or GTC
Proxy Settings: none
IP Settings: DHCP
CA Certificate: Use system certificates (no CA certificate is required)
Anonymous Identity: email@example.com
Sometimes a device may prompt for authentication several times, even though the password is correct. If this happens, keep trying. Once the device has connected, it usually connects automatically from then on. If the device tells you that the password is invalid, though, it probably is. Re-enter and try again.
Using the eduroam configuration assistant
Some devices, especially those running Windows older than Windows 10, may require the use of eduroam configuration assistant to make eduroam work. Note that this requires administrative privileges on your device.